Extron Electronics CVEQ 100 Series - Manual (Page 13)

CVEQ 100 and SVEQ 100 Series • Installation
Installation, cont’d
2-12 CVEQ 100 and SVEQ 100 Series • Installation 2-13
Installing the CVEQ 100 MAAP/SVEQ 100 MAAP
The CVEQ 100 MAAP and SVEQ 100 MAAP are three space
high mini architectural adapter plate products that mount in a
wall or furniture using an optional mounting frame or European
cable channel system.
Mounting in an external wall box
1 . Remove power from the line driver by disconnecting the
power supply.
2 . Attach the mounting frame to the wall box.
3 . Route output cables through the wall box and frame, and
connect them to the line driver.
4 . Mount the line driver to the mounting frame with machine
screws, as shown in the following illustration. Take care
not to damage the output cable(s), which fit through the
mounting frame and into the wall box.
Extron
CVEQ 100 MAAP
Composite Line Driver
Extron
MAAP 101EU
Legrand External
Wall Box
Mounting Screws
Mounting Frame
VIDE O IN
CVEQ 100 EU
AUDIO IN
L
R
Mounting the line driver in a wall box
5 . Reconnect the power supply, cable all equipment (see
chapter 3), and restore power to the equipment.
Mounting in a European cable channel
1 . Remove power from the line driver by disconnecting the
power supply.
2 . Attach the MAAP adapter plate to the junction box.
3 . Place the cover frame between the adapter plate and the
line driver, route the output cables through the frame, and
connect them to the line driver.
4 . Fasten the line driver to the adapter plate, as shown below.
Euro Channel
(not included)
Extron
CVEQ 100 MAAP
Composite Line Driver
VIDE O IN
CVEQ 100 EU
AU DIO IN
L
R Extron
MAAP 101EUC
Mounting Frame
Mounting the line driver in a Euro channel
5 . Reconnect the power supply, cable all equipment (see
chapter 3), and restore power to the equipment.