Sealey VS312 - Manual

INSTRUCTION MANUAL FOR:
Glow Plug Reamer/Base
Cleaning Set
MODEL No:
VS312
1. SAFETY inSTRuCTionS
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE inSTRuCTionS CAREFuLLY. noTE THE SAFE oPERATionAL REQuiREMEnTS,
WARninGS AnD CAuTionS. uSE THE PRoDuCT CoRRECTLY AnD WiTH CARE FoR THE PuRPoSE FoR WHiCH iT iS
inTEnDED. FAiLuRE To Do So MAY CAuSE DAMAGE AnD/oR PERSonAL inJuRY AnD WiLL inVALiDATE THE WARRAnTY.
PLEASE KEEP inSTRuCTionS SAFE FoR FuTuRE uSE.
2. inTRoDuCTion & SPECiFiCATionS
 WARninG! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
 Do noT use tools if damaged.
 Do noT use this tool for purposes other than for which it is designed.
 Maintain tools in good and clean condition for best and safest performance.
 Ensure that a vehicle which has been jacked up is adequately supported with axle stands.
 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
 Wear suitable clothing to avoid snagging. Do noT wear jewellery and tie back long hair.
 Keep children and unauthorised persons away from the work area.
 Account for all tools and parts being used and do not leave them in or near the engine.
 Do noT use the glow plug reamer/base cleaning set when you are tired or under the influence of alcohol, drugs or intoxicating medicines.
 Do noT attempt to start engine or move vehicle, whilst tools are fitted and work is in progress.
 Ensure any disconnected fuel pipes are plugged to avoid spillage.
 Account for all tools and parts being used, Do noT leave them in or near the engine. Return all parts to the case and store in a safe, dry,
childproof location.
 IMPORTANT: These instructions are provided as a guide only. Always refer to the vehicle manufacturer’s service instructions, or a
proprietary manual, to establish the current procedure and data.

WARninG! Failure to comply with these instructions may result in damage to the glow plug reamer/base cleaning set or vehicle and/or
personal injury.
 WARninG! The warnings referred to in this guide cannot cover all possible conditions and situations that may occur. It must be understood
that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
Quickly removes accumulations of carbon residue inside cylinder head assisting the installation and effective operation of replacement glow plugs.
Includes 4 reamer guides which aid the centralisation of the Chrome Vanadium reamers. Suitable for M8, M10 and M12 threaded glow plugs.
Supplied in blow moulded case.
Specifications:
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS312
Application: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M8, M10, M12 Glow Plugs
Guide Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M12x1.25, M10x1.25, M10x1.0, M8x1.0
VS312 Issue No: 1 - 30/09/11
Original Language Version
item Description item Description item Description
1 Guide Rod and Handle 4 M10x1.0 Guide 7 Small Reamer
2 M12x1.25 Guide 5 M8x1.0 Guide 8 Large Reamer
3 M10x1.25 Guide 6 Medium Reamer
3. ConTEnTS
fig.1