Sealey VS0558 User Manual
Page 2
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email [email protected] or phone 01284 757500.
Original Language Version
VS0558 Issue 1 - 29/03/12
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INfORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sole uK Distributor, sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
fig.2
fig.5
fig.6
fig.7
fig.3
fig.4
4.3 fuel Pipe separator - Open the separator, see
fig.4A, and place it onto the pipe directly below the
coupling as shown in fig.4B.
4.3.1 Push the separator up into the coupling (fig.4C).
4.3.2 Pull pipe out of coupling first and then remove the
separator from coupling as shown in fig.4D.
4.4 Clamp (Metal fuel Pipe) - Use clamp to close off end of
metal fuel pipe as indicated in fig.5.
4.5 Clamp (Banjo fitting) - Seal both sides of banjo fuel fitting
as indicated in fig.6.
4.6 Stoppers - Use to close off hoses, vacuum pipes etc as
indicated in fig.7. Two of each size supplied - 3/16", 1/4", 5/16".