Sealey SM3002DFD - Manual (Page 2)

3.10 Install the digital display retaining
screws (provided) (fig 10a), then install
the spacer washer provided and the
compound rest feed handle.
3.7 Install the new compound rest screw
retainer using the screws removed from
the original.
3.8 Install the digital display. 3.9 Install one of the small setscrews
provided. Be sure the screw fits tightly
and correctly into the slot on the feed
screw.
4. INSTALLATION 2
Installing the Cross Slide digital display.
4.1 Remove the two socket head cap
screws that retain the cross slide feed
nut.
4.2 Remove the cross slide feed nut (fig
12a) by turning the cross slide feed
handle clockwise.
4.3 Remove the cross slide feed
handle (fig 13a), the spacer washer
and the dial (fig 13b).
fig 7 fig 8 fig 9
fig 10
fig 11 fig 12 fig 13
a
a
b a
SM3002DFD - 1 - 100504