Sealey AVR2500A - Manual (Page 3)

4.1. Assembly
4.1.1. The major structural components including the hydraulic ram are pre-assembled, requiring only attachments. use the
picture below to check all parts are present.
4.1.2. A separate twin wheeled carriage enables transporting the lowered assembled vehicle lift. This carriage is also used for
removing compression springs from the base frame sprung loaded castors. Refer to section 5.8.2 and 5.8.3.
4.1.3. See the 'Maintenance' section for air line and hydraulic line circuit connections.
4. CONTENTS
Site pump here
Pawl disengage rail Front transit point twin wheel carriage
Jacking point for castor
compression spring removal
Sprung loaded transit castor
and spring retainer cup
Support pad swivel
(fixed longitudinally)
Adjustable longitudinally
Assembly shown full height
"H" = 1000
"H" = 500
Original Language Version
AVR2500A Issue: 1 - 07/11/14 © Jack Sealey Limited
fig.4
Ensure the pin enters
a graduated pin hole
in the quadrant plate