beautypg.com

Sealey AVR1500FP User Manual

Avr1500fp, Fig.1

background image

INSTRUCTIONS FOR:

AIR/HYDRAULIC VEHICLE LIFT 1.5TONNE

WITH FOOT PEDAL

MODEL N

O

:

AVR1500FP

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

GENERAL SAFETY.

WARNING! Ensure Health & Safety, local authority, and

general workshop practice regulations are adhered to

when using this equipment.

WARNING! TRAPPING DANGER – Keep hands and

fingers away from the sprockets and duplex chain.

Keep the work area clean, uncluttered and ensure there

is adequate lighting.

Maintain correct balance and footing. Ensure the floor is

not slippery and wear non-slip shoes.

Remove ill-fitting clothes. Remove ties, watches, rings,

other loose jewellery. Contain and/or tie back long hair.

Wear appropriate protective clothing.

Familiarise yourself with the applications, limitations and

potential

hazards of the vehicle lift.

DO NOT use to achieve a task the vehicle lift was not

designed to perform.

DO NOT allow untrained persons to use the vehicle

hydraulic lift.

PRE OPERATIONAL SAFETY.

Ensure adequate level space around the vehicle for the

operator and the lift.

Apply grease, if not apparent, to the carriage rollers, main

upright guides, sprockets and duplex chain to assist the

smooth action of the lifting and lowering.

DO NOT operate the vehicle lift if parts are damaged or

missing as this may cause failure and/or personal injury.

Before commencing lift, make a visual inspection of the

vehicle lift to ensure there is no sign of fractured welds,

bent adaptors or loose fixings. If found, do not use the unit

and refer to your local Sealey dealer for advice and

replacement parts. Tighten loose fixings.

Before commencing lift ensure all vehicle tyres are

correctly inflated and the vehicle sills and bodywork is

structurely sound.

 Before commencing lift ensure vehicle wheels are locked,

chocked or hand braked.

OPERATIONAL SAFETY.

DANGER! DO NOT put any limb beneath vehicle whilst

lifting or lowering.

Always insert safety stop bar when

the vehicle is raised to working height. The stop bar

must take the load not the hydraulics.

After lifting to working height insert safety stop bar and

lower load to bear on the stop as per instructions in later

sections

6.3 and 6.4.

POST OPERATIONAL SAFETY.

When not in use, clean and store the vehicle lift in a safe,

dry, childproof location.

Maintain the

vehicle lift in good condition.

Replace or repair damaged parts. Use genuine parts only.

Unauthorised parts may be dangerous and will

invalidate the warranty.

1. SAFETY INSTRUCTIONS

3. TECHNICAL SPECIFICATION

Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AVR1500FP

Maximum Load: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500kg

Maximum Lift Height: . . . . . . . . . . . . . . . . . . . . . . . . . . 995mm

Overall Height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1315mm

Overall Width:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 705mm

Overall Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990mm

Locking Spacing: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mm

Locking Positions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110kg

2.1 Wheeled heavy-duty vehicle lift offers fast, easy lifting

and lowering, with or without an air supply. Fitted with an air/

hydraulic motor for easy operation, or, if an air line is not

available it can be operated using the integral foot pump.

Includes adaptors to lift via wheel or body. This specifically

designed vehicle lift is a perfect addition to any busy

workshop or repair centre to raise a vehicle off the floor

quickly and safely. It can be used for lifting cars, 4x4s and

vans. Vehicles can be lifted from the side, front, back or

wheels with the supplied adaptors. The lift offers significant

assistance, bringing vehicles into an ergonomic working

position. Ideal for a wide variety of applications including

welding, grinding and painting.

2. INTRODUCTION

Hook on hook off wheel

cradle adaptor shown

Original Language Version

AVR1500FP Issue: 1 - 15/04/13

© Jack Sealey Limited 2013

Fig.1