Sealey PW1360 - Manual (Page 2)

2. SPECIFICATIONS & PERFORMANCE
Portable winch that can be safely and securely stowed in the vehicle. to use,simply attach the winch onto the tow ball and snap the quick
connector into the supply cable plug. remote control means that you can always be in the right position to oversee the winching. Wire rope is
long enough to reach an anchor point or to lower boat trailers down slipways. the winch is free to rotate on the ball so it will always face the
direction of the pull - no risk of the rope bunching up at one end of the drum as with fixed winches. The main benefit of this type of winch over a
fixed vehicle mounted winch is that it can be used on both the front and the back of a vehicle if a tow hitch is fitted at both ends. Winch simply
drops on to a ball or can be used with a ring hitch. Winch is supplied ready to fit. Supply cables include ring terminals to permanently connect
the cables for regular use.
Fig.1
Fig.2
Fig.3
Original Language Version © Jack sealey Limited
Model no: . . . . . . . . . . . . . . . . . PW1360
Voltage:. . . . . . . . . . . . . . . . . . . 12V
Line Pull*: . . . . . . . . . . . . . . . . . 1360kg
Motor Power: . . . . . . . . . . . . . . 2kW
Gear ratio: . . . . . . . . . . . . . . . . 586:1
Line speed*:
no Load:. . . . . . . . . . . . . . . . . . 3.6mtr/min
At Maximum Load: . . . . . . . . . . 1.7mtr/min
current Draw:
no Load:. . . . . . . . . . . . . . . . . . 8A
At Maximum Load: . . . . . . . . . . 65A
cable Ø: . . . . . . . . . . . . . . . . . . 5.4mm
cable Length: . . . . . . . . . . . . . . 15.2mtr
Winch Weight: . . . . . . . . . . . . . 16.4kg
Gross Weight:. . . . . . . . . . . . . . 18kg
replacement rope Wire: . . . . . PW1360.Wr
* Performance quoted at first layer of cable on drum
PERFORMANCE SPECIFICATIONS
CHART 1.
PW1360 Issue: 2 - 17/01/14