Sealey WF10Q - Manual

Page 1
INSTRUCTIONS FOR:
1 TONNE, QUICK LIFT, FOLDING ENGINE
CRANE
MODEL No: WF10Q
2. GENERAL
1. CONTENTS
Section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.2. Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 3. Safety/Operational Instructions. . . . . . . . . . . . . . . . . . .2.
Section 4. Maintenance/Examination/Inspection. . . . . . . . . . . . . .2.
Section 5. Assembly, Storage and Bleeding . . . . . . . . . . . . . . . . .3.
Section 6. Owner’s & Operator’s Responsibilities. . . . . . . . . . . . .4.
Section 7. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.
Section 8. Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . .5.
Section 9. Parts List/Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.
Page No.
2.1 Identification
Supplier: Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No:
WF10Q
2.2 Technical Data
Rated Capacity
Safe Working Load (SWL) 1t (tested to 50% overload).
Working Load Limit (WLL) 1t (tested to 50% overload).
Lifting Cap. in Position 1: . . . . . . . . . . . . . . 1000kg
Lifting Cap. in Position 2: . . . . . . . . . . . . . . 900kg
Lifting Cap. in Position 3: . . . . . . . . . . . . . . 800kg
Lifting Cap. in Position 4: . . . . . . . . . . . . . . 700kg
Lifting Cap. in Position 5: . . . . . . . . . . . . . . 600kg
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84kg
a) Design Capability: Test Load 50% overload.
b) For a description of in-service and out-of-service conditions see
Section 3 Safety, Section 4 Maintenance and Section 6.
c) The crane is fitted with a bypass valve that will prevent the ram
from over extending.
d) For applications see Section 3 Safety.
e) For control system, see Fig.1 for release valve and pump handle
assy. Usage is explained in Section 3.2 Operation.
f) For ground condition requirements, see Section 3 Safety.
g) For information on parts and materials requiring specialised
repair techniques see Section 4 Maintenance.
PUMP HANDLE ASSY.
RELEASE VALVE
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
fig.1
Original Language Version
WF10Q Issue: 3(I) - 09/12/14 © Jack Sealey Limited
Refer to
instruction
manual
Wear
protective
footwear
Wear
protective
gloves