Sealey SC10 - Manual (Page 3)

5. ASSEMBLY/STORAGE INSTRUCTIONS
5.1 ASSEMBLY
5.1.1 Unpack the product and check contents against the parts list included with these instructions. Should there be any damaged or
missing parts contact your supplier immediately. We recommend two people assemble the crane.
5.1.2 Lay out all the parts in the appropriate positions ready for assembly.
5.1.3 When assembling, ensure that you fit a plain washer, then a locking washer before fitting nuts on to bolts.
5.1.4 Assemble the crane main frame first, leaving the hydraulic ram assembly until last.
NOTE: At this stage all nuts and bolts should be finger tight only.
5.1.5 Connect the base of the ram assembly to the ram assembly mounting.
5.1.6 Raise the lift arm and carefully move it until the ram fits the arm bracket. Engage the pin and secure with the fasteners provided.
5.1.7 Now tighten all the nuts and bolts on the main frame.
5.1.8 Assemble and insert the legs and locate with the lock pins provided.
5.1.9 Before using crane place the pumping handle on the release valve and turn anti-clockwise. With the handle inserted in the pump
socket, pump 20 times through the full stroke, thus bleeding from the hydraulic system any air which may have entered during
transit.
5.2 STORAGE
5.2.1 Always store the crane fully closed so that the jib is in lowest position and the ram is closed (fig.3).
5.2.2 To save space the legs may be folded into the upright position and secured in place using the lock pins (fig.3).
NOTE: THE OWNER AND/OR OPERATOR MUST STUDY THESE INSTRUCTIONS AND RETAIN THEM FOR FUTURE USE.
6.1
UNDERSTANDING INSTRUCTIONS AND WARNINGS
6.1.1 The owner and/or operator shall understand the operating instructions and warnings before operating the crane. Warning information
must be emphasised and understood. If the operator is not fluent in English, the product instructions and warnings must be read to,
and discussed with the operator in the operator’s native language by the owner making sure the operator understands the contents.
6.2 DAMAGED CRANES
6.2.1 Any crane which appears to be damaged, badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE! It is
recommended that necessary repairs be made by an authorised service agent.
6.3 END OF SERVICE
6.3.1 Through years of normal wear and tear, the crane may eventually become unserviceable. When this happens ensure the hydraulic oil
is drained off and disposed of in accordance with local authority regulations.
6. OWNER’S & OPERATOR’S RESPONSIBILITIES
Original Language Version
SC10.V3 Issue: 2 - 01/12/14
fig.3
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
© Jack Sealey Limited