Sealey SC10 - Manual

INSTRUCTIONS FOR:
FOLDING WORKSHOP CRANE
1TONNE 'KD' TYPE
MODEL No:
SC10.V3
2. GENERAL
1. CONTENTS
Page No.
Section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.2. Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 3. Safety/Operational Instructions. . . . . . . . . . . . . . . . . . .2.
Section 4. Maintenance/Examination/Inspection. . . . . . . . . . . . . .2.
Section 5. Assembly and Storage. . . . . . . . . . . . . . . . . . . . . . . . .3.
Section 6. Owner’s & Operator’s Responsibilities. . . . . . . . . . . . .3.
2.1 IDENTIFICATION
Supplier: Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No: SC10.V3
2.2 TECHNICAL DATA
2.2.1 Rated Capacity
Safe Working Load (SWL) 1t (tested to 50% overload).
Lifting Cap. in Position 1:. . . . . . . . . . . . . . . . . . . .1000kg
Lifting Cap. in Position 2:. . . . . . . . . . . . . . . . . . . .750kg
Lifting Cap. in Position 3:. . . . . . . . . . . . . . . . . . . .500kg
Lifting Cap. in Position 4:. . . . . . . . . . . . . . . . . . . .250kg
Weight:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77kg
2.2.2 Design Capability: Test Load 50% overload.
2.2.3 For a description of in-service and out-of-service conditions
see Section 3 Safety, Section 4 Maintenance and Section 6
Owner's & Operator's Responsibilities.
2.2.4 The crane is fitted with a bypass valve that will prevent the
ram from over extending.
2.2.5 For applications see Section 3 Safety.
2.2.6 For control system, see fig.2 for release valve, pump
assembly and handle. Operation is explained in Section 3.2.
2.2.7 For ground condition requirements, see Section 3 Safety.
2.2.8 For information on parts and materials requiring specialised
repair techniques see Section 4 Maintenance.
fig.2
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
Original Language Version
SC10.V3 Issue: 2 - 01/12/14 © Jack Sealey Limited
fig.1
Refer to
instruction
manual
Wear
protective
footwear
Wear
protective
gloves