Operating instructions 5. maintenance – Sealey SA800 User Manual
Page 3
3.3. Dust Collection (SA801.V5 only)
3.3.1. The dust outlet tube of the sander must be connected to a dust-free system in accordance
with COSHH and any other regulations that may apply to the work area. For information on
dust-free systems, contact your local Sealey dealer.
WARNING! Disconnect sander from the air supply before changing accessories, servicing
or performing maintenance. Replace or repair damaged parts. Use recommended parts
only. Unauthorised parts may be dangerous and will invalidate the warranty.
5.1. If the air supply does not have an oiler then every 3-4 hours of operation place a few drops
of air tool oil (Sealey No. ATO/500 or ATO/1000) into the air inlet to prolong tool life.
5.2. Clean the sander after use and change pads when required.
5.3. Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. To remedy, check the air supply and follow the instructions in
Section 3.
b) Grit or gum deposits in the tool may also reduce performance. If your model has an air
strainer (located in the area of the air inlet), remove the strainer and clean it.
Flush the tool out with gum solvent oil or an equal mixture of SAE 10 oil and kerosene.
Allow to dry before use.
c) If you continue to experience problems, contact your local Sealey service agent.
4. OPERATING INSTRUCTIONS
5. MAINTENANCE
4.1. Attach the appropriate sanding disc to the sanding pad.
4.2. Connect the sander to the air supply (and the dust free system for SA801.V5). Press the
control valve (On/Off) lever and check that the unit is working correctly.
Note: The sander is designed for dry use only. DO NOT use with water or any other liquids.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
SA800.V5, SA801.V5 Issue: 1 - 23/07/13
SA800.V5
SA801.V5
© Jack Sealey Limited