Epson Stylus NX300 - Manual (Page 42)

42 Solving Problems
■ Use the Automatic Document Feeder to fax or scan legal-size documents, but
not to copy them. Letter-size paper is automatically selected for copying. If
you copy a legal-size document, your image will be cropped.
■ Make sure your original is positioned against the back left corner of the
scanner glass. If the edges are cropped, move your original away from the
edges slightly.
Paper Feeding Problems
If paper doesn’t feed correctly when printing, remove the paper and flip through
the stack to separate the sheets. Reload the paper against the right side and slide
the edge guide against it. Do not load too many sheets at once. Load up to 20
sheets of photo paper or 100 sheets of plain paper. Load other special papers one
sheet at a time.
If paper has jammed, follow these steps:
1. Gently pull out jammed paper from the output tray or sheet feeder.
2. If paper is stuck inside, press the P On button to turn off the NX300 Series.
Then lift the scanner, remove the jammed paper and torn pieces, close the
scanner, and turn the NX300 Series back on.
If documents don’t feed correctly in the Automatic Document Feeder, make sure
the corners of the paper are not bent, folded, or curled up. Do not load more than
30 sheets of letter- or 10 sheets of legal-size paper at a time. If documents have
jammed:
1. Open the ADF cover and remove any jammed paper.
Caution:
Do not try to remove the paper without opening the ADF cover first, or you could
damage the mechanism.
NX300_QG.book Page 42 Wednesday, May 7, 2008 10:42 AM