Epson Stylus NX300 - Manual (Page 16)

16 Faxing a Document or Photo
Setting Up Fax Features
Before sending or receiving faxes, you must create a fax header and select your fax
preferences.
Note:
To change other settings or print fax reports, see the on-screen Epson Information
Center.
Entering Fax Header Information
You should enter your name and phone number in the fax header before sending
faxes so that recipients can identify the origin of the fax.
Note:
If you leave the NX300 Series unplugged for a long period of time, the date and time
settings may get lost. See the Start Here sheet or on-screen Epson Information Center
for instructions on setting the date and time.
Entering Your Sender Name
1. Press the Copy/Fax button to select Fax mode, then press Menu .
2. Press u or d to select Fax Setting , then press
OK .
3. Press u or d to select Header , then press OK .
4. Select Fax Header , then press OK .
5. Use the numeric keypad to enter your sender
name or other header information (see
page 17). You can enter up to 40 digits.
6. Press OK . You return to the Fax Header screen.
Entering Your Phone Number
1. From the Fax Header screen, press u or d to
select Your Phone Number , then press OK .
You see the phone number input screen.
2. Use the numeric keypad to enter your phone number (see page 17). You can
enter up to 20 digits.
NX300_QG.book Page 16 Wednesday, May 7, 2008 10:42 AM