Epson Stylus NX300 - Manual (Page 22)

22 Faxing a Document or Photo
If you are scanning with the Automatic Document Feeder, your document is
automatically scanned and faxed.
If you placed your document on the scanner glass, you see this screen after the
first page is scanned:
If you need to fax additional pages, place your original on the scanner glass or
in the Automatic Document Feeder. Then press
1 to continue. If you do not
need to fax another page, press 2 . Your document is faxed.
Note:
If the fax number is busy, you see a redialing message and the NX300 Series
redials after one minute. To redial immediately, press Redial/Pause.
Receiving Faxes
Before receiving faxes, make sure you load plain paper and select the Paper Size
setting that matches the size of paper you’ve loaded (see “Select Scan and Print
Settings” on page 18). If the incoming fax pages are larger than the paper size you
loaded, the fax size is reduced to fit or printed on multiple pages, depending on
the
Auto Reduction setting you select (see page 18).
If you run out of paper during printing, you see the error message Paper out .
Load more paper and press the OK button to continue.
To receive faxes automatically, make sure the Auto Answer light is turned on. To
turn it on, press the Auto Answer/Space button and press OK .
Note:
To change the number of rings before the NX300 Series answers, see page 15.
Auto Answer/
Space
Redial/Pause
Stop/
Clear Settings
B & W
Color
Copy/Fax
Speed Dial
Group Dial/
Backspace
Auto Answer light
NX300_QG.book Page 22 Wednesday, May 7, 2008 10:42 AM