Epson Stylus NX300 - Manual (Page 38)

38 Maintaining Your NX300 Series
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Leave the expended cartridge(s) installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on the NX300 Series.
If an ink cartridge is low or expended, you see a
message on the NX300 Series display screen
indicating which color to replace. Press
OK .
If you’re replacing a cartridge before you see a message on the NX300 Series
display screen, press the
Copy/Fax button, press Menu , press u or d to select
Maintenance , and press OK . Then select Change Ink Cartridge and press
OK .
2. Open the scanner, then open the cartridge cover.
3. Squeeze the tab on the cartridge and lift it up.
Dispose of it carefully. Do not take the used
cartridge apart or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water. Keep ink cartridges out of the
reach of children.
NX300_QG.book Page 38 Wednesday, May 7, 2008 10:42 AM