Epson Stylus NX300 - Manual (Page 11)

Copying a Document or Photo 11
Copying a Document or Photo
Follow the instructions in this section to make color or black-and-white copies.
Note:
To turn off the “beep” heard when you press a button, press Copy/Fax, press Menu,
press
u or d to select Maintenance, press u or d to select Sound, press OK, and
select Off.
Copying a Document
You can copy documents onto letter-size (or A4) plain paper or Epson special
paper just like you would on a copy machine. If you use the Automatic Document
Feeder, you can copy up to 30 sheets at a time onto letter-size (or A4) plain paper.
1. Press the P On button to turn on the NX300 Series.
2. Load letter- or A4-size plain paper, Epson Bright White Paper, or Epson
Presentation Paper Matte in the sheet feeder (see page 5).
3. Place your original document(s) on the
scanner glass or in the Automatic Document
Feeder (see page 8 or 9).
4. Press the Copy/Fax button to enter Copy
mode.
5. Press u or d or use the numeric keypad to
select the number of copies you want (up to 99).
6. To change the layout, press Menu , press u or
d to select Layout , and press OK .
Note:
You cannot print borderless on plain paper.
7. To change any other print settings, press u or d and select your settings.
■ To adjust the copy size, select Reduce/Enlarge and choose either Actual ,
Custom (to select a percentage using u or d or the numeric keypad), or
Auto Fit Page (to automatically size the image to fit your paper).
NX300_QG.book Page 11 Wednesday, May 7, 2008 10:42 AM