Melinera Z30094C-BS - Manual (Page 11)

11 GB
Preparing … / Use / Maintenance / Cleaning / Care
Replacing the bulb
RISK TO LIFE FROM ELECTRIC SHOCK!
Pull the adapter 11 out of the mains socket before performing
any tasks on the product.
Release the screws 17 on the lamp attachment assembly 1
using a screwdriver (see Figure B).
Take off the halogen bulb 18 . Insert a new halogen bulb 18 (see
Figure B).
Retighten the screws 17 using a screwdriver.
Maintenance / Cleaning / Care
DANGER TO LIFE FROM ELEC-
TRIC SHOCK! Before doing any work on the prod-
uct, pull the adapter
11 out of the socket.
Ensure that the water level never drops below the MIN marking
(inside) wall of water container 12 .
Fill up or change “distilled” water when the water level is below
the MIN mark (see “Changing the distilled water”). Check the
water level by slightly raising the base
6 . If no water flows from
the ornamental stone 2 , and the mains adapter 11 is connected
to a mains socket, then the water level is probably too low.
Change the “distilled” water at least once a week (see “Chang-
ing the distilled water”). This will prevent algae from forming.
Check and clean the tabletop fountain, pebbles 13 , water con-
tainer 12 and pump 8 at regular intervals. Never use aggres-
sive or corrosive cleaning agents to do this. Ensure that no foreign
bodies can enter the pump
8 or the connection hose 7 .
Pour out the water and allow the tabletop fountain to dry com-
pletely if you are going to leave it unused for an extended period
(see “Changing the distilled water”).