Melinera Z30094C-BS - Manual (Page 10)

10 GB
Preparing for use / Use
Note: Brush your hand across the water outlet in the ornamental
stone
2 to ensure that the water flows evenly out of the orna-
mental stone 2 .
Pull the adapter 11 out of the socket to switch off the tabletop
fountain.
Changing the distilled water
RISK OF LOSS OF LIFE BY ELECTRIC SHOCK!
Ensure that the power supply cord 10 does not fall into the water or
come into contact with water.
Note: To prevent algae from forming, change the water at regular
intervals – at least 1 x per week - and clean the water container
12 .
RISK OF LOSS OF LIFE BY ELECTRIC SHOCK!
Pull the adapter 11 out of the socket.
Remove the base 6 together with ornamental stone 2 from the
water container 12 .
Pull the connection hose 7 from the connection piece 15 .
Place the base 6 together with the ornamental stone 2 , lamp
attachment assembly 1 and pump 8 carefully to one side.
Pour the water carefully out of the drainage hole 9 . Clean the
water container 12 with a soft cloth (or similar) and a little clean-
ing agent, if necessary. Remove limescale deposits from the water
container
12 when required using an ordinary limescale remover.
Fill the water container 12 with fresh water up to the MAX mark-
ing (inside wall) of the water container 12 .
Reassemble the tabletop fountain (see “Assembly”).