Crivit Bottom/Feeder Fishing Reel Combo 300-6 - Manual (Page 17)

Assembly instructions
1. The small stationary reel is
assembled on the rod.
2. Check the proper fit and the
secure hold of the reel on the
rod.
3. Open the bail arm of the reel.
4. Starting from the reel, pull the
line through all line rings of the
rod.
5. At the end of the line, the small
swivel is fastened by means of a
half, locked blood knot.
6. The knot must be checked by a
tensile test.
7. One end of the steel leader is
hung in the karabiner part of the
swivel.
8. Close the karabiner of the
swivel.
9. At the free end of the steel
leader, the lure is fastened.
10. At its connections, the steel
leader is checked for stability by
a tensile test.
11. Close the bail arm of the reel.
12. The brake of the stationary reel
is adjusted according to the
stability of the line and its
connections.
13. Have the following accessories
with you:
(a) Lip grip
(b) Measuring device
(c) Stunning equipment
(d) Knife
(e) Unhooking pliers
(f) Mouth lock
Swivel assembly
Fasten the swivel with a
half, locked blood knot
1. Pass the line through
the eye of the swivel
2. Lay at least 5 turns around
the main line
3. Pass the end of the line
through the eye between
the swivel and the turns
and lock it
4. Slightly moisten the line (tip of the
tongue) and pull it to a knot
A s s e m bly instructions for the
t ro u t / p e rch spinning ro d
Lure assembly
Hang the eye of the lure in the karabiner of the
swivel and close it
Reel assembly
Fixed reel seat Insert reel foot into
the reel seats
Screw-in reel
holder with lock
nut
Fix reel seat with
nut and secure it
with the lock nut
Moveable
reel seat
Nut
Lock nut
© Reprint and publication in extracts only
with permission of the HoSpo-Verlag,
51674 Wiehl
- GERMANY -
C AU T I O N!
Keep hooks and small parts away
from children and pets. These arti-
cles may only be used under gui-
dance of adults.
GB