Mi-trout-nature-gb, Assembly instructions for the trout/perch rod – Crivit Bottom/Feeder Fishing Reel Combo 300-6 User Manual
Page 7

Assembly instructions
1. The small stationary reel is
assembled on the rod.
2. Check the proper fit and the
secure hold of the reel on the
rod.
3. Open the bail arm of the reel.
4. Starting from the reel, pull the
line through all line rings of the
rod.
5. Assemble the stopper.
6. Thread the small glass beads.
7. Add a small sliding float with a
load bearing capacity of
max. 5 g.
8. Clamp the lead shots.
9. Fasten the small swivel by
means of a half, locked blood
knot.
10. Check the knot for right fit and
stability by a tensile test.
11. Hang the leader with hooks of
size 12 or smaller in the open
karabiner of the swivel.
12. Close the karabiner of the
swivel.
13. The stability of the leader must
under no circumstances be
higher than that of the main line.
14. Check the knots of the leader by
means of a tensile test.
15. Close the bail arm of the reel.
16. Adjust the brake of the
stationary reel.
17. Have the following accessories
with you:
(a) Mesh landing net
(b) Measuring device
(c) Stunning equipment
(d) Knife
(e) Unhooker
The fish species that are most often
caught using this fishing method are:
roach, rud, bream, trout, orfe and
other fish species.
main Line
Assembly instructions
for the trout/perch rod
Stopper assembly
Pass the line through the float
rubber (valve rubber)
Repeat the procedure
Tighten the line
Sliding float assembly
Lead shot assembly
The line is inserted in the slot
of the lead and pinched
Swivel assembly
Fasten the swivel with
a half, locked blood knot
1. Pass the line
through the eye
of the swivel
2. Lie at least
5 turns
around the
main line
3. Pass the
end of the line
through the eye
between the
swivel and the
turns and lock it
4. Slightly moisten the
line (tip of the tongue)
and pull it to a knot
Leader assembly
Hang the leader with hooks of
size 12 or smaller in the karabi-
ner of the swivel and close it.
Reel assembly
Fixed reel seat
Screw-in reel
holder with lock
nut
Moveable
reel seat
Nut
Lock nut
Insert reel foot
into the reel seats
Fix reel seat with
nut and secure it
with the lock nut
Hook size 12 or
smaller
The leader must be
weaker than the main line
© Reprint and publication in extracts only
with permission of the HoSpo-Verlag,
51674 Wiehl
- GERMANY -
C AU T I O N!
Keep hooks and small parts away
from children and pets. These arti-
cles may only be used under gui-
dance of adults.
GB
Glass bead