Crivit Bottom/Feeder Fishing Reel Combo 300-6 - Manual (Page 15)

Assembly instructions
1. The medium stationary reel is
assembled on the rod.
2. Check the proper fit and the
secure hold of the reel on the
rod.
3. Open the bail arm of the reel.
4. Starting from the reel, pull the
line through all line rings of the
rod.
5. At the end of the line, the small
swivel is fastened by means of
a half, locked blood knot.
6. The knot must be checked by a
tensile test.
7. One end of the steel leader is
hung in the karabiner part of the
swivel.
8. Close the karabiner of the
swivel.
9. At the free end of the steel
leader, the lure is fastened.
10. At its connections, the steel
leader is checked for stability by
a tensile test.
11. Close the bail arm of the reel.
12. The brake of the stationary reel
is adjusted according to the
stability of the line and its
connections.
13. Have the following accessories
with you:
(a) Lip grip
(b) Measuring device
(c) Stunning equipment
(d) Knife
(e) Unhooking pliers
(f) Mouth lock
Assembly instructions
for the
pike/zander spinning rod
Swivel assembly
Fasten the swivel with a half,
locked blood knot
1. Pass the line through t
he eye of the swivel
2. Lie at least 5 turns
around the main line
3. Pass the end of the line
through the eye
between the swivel and
the turns and lock it
4. Slightly moisten t
he line (tip of the
tongue) and pull
it to a knot
Lure assembly
Hang the eye of the lure in the
karabiner of the swivel and close it
Steel leader assembly
Hang the noose of the steel lea-
der in the karabiner of the swivel
and close it.
Reel assembly
Fix reel seat with nut and
secure it with the lock nut
Insert reel foot
into the reel seats
Lock nut
Nut
Moveable reel
seat
Screw-in reel
holder with
lock nut
Fixed reel seat
© Reprint and publication in extracts only
with permission of the HoSpo-Verlag,
51674 Wiehl
- GERMANY -
C AU T I O N!
Keep hooks and small parts away
from children and pets. These arti-
cles may only be used under gui-
dance of adults.
GB