Crivit Z30080 - Manual (Page 99)

101 GB/MT
The batteries may not have been inserted correctly.
Check the position of the batteries and/or replace them.
The batteries may be too weak.
Replace the used batteries with new ones.
The earphones
13 may be faulty.
Check the earphones 13 on a different device.
Note: Make sure that the connecting plug (2.5 mm mono
earphone jack) on the earphones
13 matches the socket on
the device.
!
Restore factory settings
# If the equipment is exposed to a strong electro-magnetic high-
frequency field, or if there is electro-static discharge, this may
lead to malfunctions. If malfunctions do occur, for example the
buttons do not reach or the display is shown incorrectly, press
the RESET switch
12 to reset the equipment to the factory def-
aults. Use a thin, pointed object to do this. The malfunctions
should then be eliminated.
IMPORTANT! Please note that this will delete all data. It will
then be necessary to reset all the parameters.
Getting started
54421_Z30080_Schrittzaehler_Content_LB5.indd 101 21.09.10 12:47