Getting started, Setting parameters – Crivit Z30080 User Manual

Page 90

92 GB/MT

Setting parameters

Switch the device to

hold mode (see “Hold mode / Count

mode”).

Press the SET button

to switch to

entry mode.

Note: If you do not make an entry within 15 seconds, the de-
vice automatically switches to

hold mode.

STRIDE appears on the function bar

. The cm icon

and

the default 60 cm appear on the LCD screen. Press the MODE

and CLEAR

buttons to set the required stride length.

Note: The stride length can be set within a range of 10 to
225 cm.

Tip: Hold down the MODE

and CLEAR

buttons for ap-

prox. 3 seconds. This enables you to make the settings faster. You
can also use this faster setting option for subsequent settings.

Confirm your entry by pressing the SET button

. WEIGHT

appears on the function bar

. The kg icon

and the de-

fault 60 kg appear on the LCD screen. Press the MODE

and CLEAR

buttons to set the required weight.

Note: The weight can be set within a range of 30 to 135 kg.

Confirm your entry by pressing the SET button

. Time

and

(24-hour format) and / or

(12-hour format)

light up. Press the MODE

and CLEAR

buttons to set the

required time format.

Note: The PM icon

stands for afternoons in 12-hour format.

Getting started

54421_Z30080_Schrittzaehler_Content_LB5.indd 92

21.09.10 12:47