Getting started, Setting the day of the week – Crivit Z30080 User Manual
Page 91
93
GB/MT
#
Confirm your entry by pressing the SET button
3
. Time
24
appears and the hours of the time display
19
start to flash. Press
the MODE
4
and CLEAR
1
buttons to set the required time.
#
Confirm your entry by pressing the SET button
3
. The minutes
of the time display
19
start to flash. Press the MODE
4
and
CLEAR
1
buttons to set the required time.
#
Confirm your entry by pressing the SET button
3
. Alm
22
ap-
pears and the hours of the time display
19
start to flash. Press
the MODE button
4
to set the required alarm time.
IMPORTANT! The CLEAR button
1
has a different function
when setting the alarm. Press the CLEAR button
1
to activate
the alarm. The alarm icon
23
appears on the LCD screen.
Press the CLEAR button
1
again to deactivate the alarm. The
alarm icon
23
disappears (see “Alarm Function”).
#
Confirm your entry by pressing the SET button
3
. The minutes
of the time display
19
start to flash. Press the MODE button
4
to set the required alarm time.
#
Confirm your entry by pressing the SET button
3
. The device
now returns to
hold mode.
!
Setting the day of the week
#
Switch the device to
hold mode (see “Hold mode / Count
mode”).
Getting started
54421_Z30080_Schrittzaehler_Content_LB5.indd 93
21.09.10 12:47