Getting started, Hold mode / count mode – Crivit Z30080 User Manual

Page 89

Text mode
Original mode

GB/MT

Getting started

Before using the device for the first time, you must set the following
parameters: length of stride (walking), body weight, current time,
day of the week. The functions offered by the pedometer cannot
otherwise be used to proper effect.
To make settings, you must first switch the pedometer from

count

mode to hold mode.

Hold mode / Count mode

When you start the device for the first time, the pedometer is auto-
matically in

count mode.

Note: In hold mode the measuring functions of the pedometer
are disabled.

Press the MODE button

for approx. 3 seconds. You will

hear a signal.

flashes alternately with the number of

steps.

Press the MODE button

for approx. 3 seconds to enter

count mode. You will hear a signal.

disappears.

Getting started

54421_Z30080_Schrittzaehler_Content_LB5.indd 91

21.09.10 12:47