Getting started, Alarm function – Crivit Z30080 User Manual
Page 96
98 GB/MT
#
Press the MODE button
4
again to stop the stopwatch.
#
Press the CLEAR button
1
to set the stopwatch to 0.
#
Press the FUNC button
2
to return to
count mode.
Using the stopwatch with the pedometer (the device
must be in count mode):
#
Press the FUNC button
2
twice to enter
stopwatch
mode. Stopwatch
25
appears on the LCD screen.
#
Press the MODE button
4
to start the stopwatch.
#
Press the FUNC button
2
to switch to
count mode. The
pedometer is active. The stopwatch continues running in the
background.
#
Press the FUNC button
2
twice to return to
stopwatch mode.
#
Press the MODE button
4
again to stop the stopwatch.
#
Press the CLEAR button
1
to set the stopwatch to 0.
Note: The stopwatch can only be set to 0 in stopwatch
mode.
#
Press the FUNC button
2
to return to
count mode.
!
Alarm function
#
Set the required alarm time (see “Setting parameters”).
Note: The set alarm is activated every day. The alarm signal
rings for approx. 1 minute.
#
Press any button to deactivate the alarm signal.
Getting started
Getting started
54421_Z30080_Schrittzaehler_Content_LB5.indd 98
21.09.10 12:47