Crivit Z30080 - Manual (Page 88)

90 GB/MT
your device, you should remove them immediately in order to
prevent damage to the device!
" Avoid contact with the skin, eyes and mucous membranes.
Any parts of the body coming into contact with battery acid
should be rinsed off with copious amounts of water and / or a
doctor contacted if necessary!
" Only use the stated battery types.
!
Before you start
# On delivery, the LCD screen of the device is covered with a
protective film to prevent mechanical damage. Remove the
protective film carefully before using the device for the first time.
!
Removing the isolating strip
The batteries are already installed in the device on delivery.
# Pull the isolating strip on the back of the device in the direction
of the arrow.
Your pedometer is now ready for operation and is in count mode
(see “Hold mode / Count mode”).
Getting started Safety / Before you start
54421_Z30080_Schrittzaehler_Content_LB5.indd 90 21.09.10 12:47