Euphonix System Digital Audio Mixing System 5B - Manual (Page 144)

System 5-B Digital Audio Mixing System Operation Manual GPI/O Event System
144
11.9.2 Move a Fader to Turn On the Floor Monitors
This example demonstrates how to turn on the floor monitors by moving any one of
several faders below a selected level.
1. In the Event Configuration window, under Event List, click on the
add event> field.
The Add Event dialog appears.
2. Select OR as the logical operator from the dropdown menu.
3. Under Input, click on the field.
The Add Input Event dialog appears.
4. Select Fader from the dropdown menu and click OK.
5. Configure the Input Properties to the following settings:
Channel # 1
Activation level (dB) -50
Activation Type Below
6. Repeat steps 3–5 for any additional channel faders and set the Channel # in
step 5 to the new channel number.
7. Under Output, click on the field.
The Add Output Event dialog appears.
8. Select Control Room from the dropdown menu and click OK.
9. Configure the Output Properties to the following settings:
Action Monitor A
Active State On