Epson MF1436-02 - Manual (Page 27)

S5U1C63000H2 MANUAL EPSON 21
(S1C63 FAMILY IN-CIRCUIT EMULATOR)
CHAPTER 8: TROUBLE SHOOTING
CHAPTER
8 T
ROUBLE
S
HOOTING
Following shows some hardware errors and their possible causes.
● A message of "connecting with ICE...failure" is displayed at the execution of the
debugger.
- Is power of S5U1C63000H2 on ?
- Is circuit breaker (CB) off ?
- Is host cable connected correctly ?
- Is DIP switch of S5U1C63000H2 set correctly ?
- Is baud rate between host and ICE set correctly ?
- Is target cable connected correctly ?
- Is various board (peripheral circuit board, LCD board) inserted firmly ?
● The circuit breaker (CB) operates and the power LED goes off when the
S5U1C63000H2 power is turned on.
- Is target cable connected correctly ?
- Is V
DD or V SS short-circuited on a target ?
Refer to "S5U1C63000A Manual" for operations of the debugger.