Epson Cinema 200+ - Manual (Page 37)

37
Using Cinema Color Editor
You can use the Cinema Color Editor software that came with your projector to adjust each
color in the picture individually. You can also use the software in place of your remote
control, letting you switch image sources, adjust the picture’s aspect ratio, or change image
quality settings right from your computer.
Setting Up Your Computer
Before using Cinema Color Editor, follow the instructions in this section to install the
software and connect the projector to your computer.
System Requirements
You can install Cinema Color Editor on any Windows ® or Macintosh system that meets these
minimum requirements:
Windows Macintosh
Microsoft ® Windows NT ® 4.0, 98SE, Me,
2000, or XP
Macintosh OS 8.6 through 9.x, OS X 10.1.5
or later
Pentium ® MMX TM 166 MHz or better Power Macintosh G3 300 MHz or better
10MB RAM 7MB RAM
2MB hard disk space 5MB hard disk space
XGA (1024
× 768) or better display adapter and monitor