Focusing and zooming the image, Selecting the input signal setting, 21 focusing and zooming the image – Epson Cinema 200+ User Manual

Page 21

Focusing and Zooming the Image

To adjust the sharpness or size of the image:

Note: Before starting, you may want to display a test pattern to facilitate adjustment. Press the
Pattern button on the remote control, then select Cross-hatching.

1. Press the

Focus

Zoom

button on the projector or

remote control. You see this screen:

2. Use the arrow buttons to adjust the image

sharpness or size.

Note: If you use the remote control, you can stand close
to the screen while focusing the image. This lets you
adjust the picture more precisely.

3. Press

when done.

Selecting the Input Signal Setting

If you’re using the projector’s Input A port, select the correct setting for the type of video
equipment you’ve connected to it:

1. Press the

button on the remote control.

2. Use the menu navigation buttons to open the

Setting

menu, then open the

Input Signal

menu and select

Input A

3. Choose from these options:

■ YCbCr

for a video player that outputs an NTSC signal.

■ YPbPr

for a video player that outputs an HDTV signal.

■ RGB-Video

for a video player that outputs an RGB video signal.

Note: Check the label next to the port on your video equipment, if you’re unsure of which
setting to use.