Performing keystone correction, 23 performing keystone correction – Epson Cinema 200+ User Manual

Page 23

Text mode
Original mode

Performing Keystone Correction

If the projected image looks like

, use the Keystone function to correct its shape.

Note: If the image is shaped like

, the projector has been placed off to the side of the

screen and angled toward it. Face the projector straight ahead (instead of at the center of the
screen), then use the horizontal lens shift knob to center the image.

To perform keystone correction:

1. Press the

button on the remote control.

2. Use the menu navigation buttons to open the

Setting

menu, then open the

Screen

menu and select

Keystone

3. Use the

arrow buttons to adjust the shape of the

image.

4. Press the

button when done.

button

navigation

buttons