Resetting the projector, 32 resetting the projector – Epson Cinema 200+ User Manual
Page 32
32
Resetting the Projector
If the image quality isn’t what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Setting menu), open that
menu, select
Reset
, and confirm as needed. The example below shows how to reset the
Image menu:
You can also reset the lamp usage timer, clear the memory settings, or restore all the projector
settings to their original values. Follow these steps:
1. Press the
Menu
button on the remote control.
2. Open the
Reset
menu.
3. Do one of the following:
■
Select
Lamp-Hours Reset
to clear the lamp usage timer and reset it to zero
(see page 53 for more information).
■
Select
Memory Reset
to clear any memory settings you created, as described on
■
Select
All Reset
to return almost all projector menus to their original settings.
Note: All Reset does not reset the lamp timer, menu language, Input Signal, and memory
settings.
Open the Image
menu . . .
. . . and select
Reset