Electrolux EBGL70 - Manual (Page 21)

Problem Possible cause Solution
The appliance is activated
and does not heat up.
The fan does not operate.
The display shows
“Demo”. The test mode is activa-
ted. 1. Deactivate the appli-
ance.
2. Touch and hold
until the appliance
activates and deacti-
vates.
3. Touch and hold
and
at the same
time until an acoustic
signal sounds and
“Demo” goes out.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre. The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (Mod.) .........................................
Product number (PNC) .........................................
Serial number (Serie:) .........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters. The handle profile can be re-
placed to match the décor of your
kitchen. The change must be
done by an authorized person.
Use only genuine replacement
parts.
min.
3 mm
To lift the appliance, do not use
the door handle.
ENGLISH 21