Electrolux EBGL70 - Manual (Page 18)

4. Touch until the display shows .
5. The display shows the duration and
default temperature. Touch OK to
start the cleaning.
6. An acoustic signal sounds when the
steam cleaning is completed.
Touch a sensor field to stop the sig-
nal.
7. Clean the appliance with a soft cloth.
Remove water from the steam gener-
ator with the sponge and rub it dry.
Keep the door open for approxi-
mately 1 hour to let the appliance
dry fully.
You can use the End function to
delay the start of the cleaning. Re-
fer to "Setting the END".
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf support
1. Carefully pull the support up and out
of the front catch.
2. Lightly move the support on the front
catch inwards.
3. Pull the support out of the rear catch.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
18 www.electrolux.com