Electrolux EBGL70 - Manual (Page 14)

9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table
for roasting in the recipe book.
• The core temperature: refer to the table
for the core temperature sensor in the
recipe book.
Only use the core temperature
sensor supplied or the correct re-
placement parts.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with
on the handle) into
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows flashing and
the default set core temperature. The
temperature is 60 °C for the first op-
eration, and the last set value for each
subsequent operation.
4.
Touch or to set the core tem-
perature.
5.
Touch or the settings save auto-
matically after 5 seconds.
You can set the core temperature
only when
flashes. If is in
the display but does not flash be-
fore you set the core temperature,
touch and
or to set a
new value.
6. Set the heating function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
While the appliance calculates the
approximate duration time, the
display shows the count up time.
After the first calculation the dis-
play shows the approximate dura-
tion of the cooking time.
The appliance continues to calcu-
late the duration during the cook-
ing. The display updates at inter-
vals with the new duration value.
7. When the meat is at the set core tem-
perature, an acoustic signal sounds
for two minutes and the value of the
core temperature and
flash. The
appliance deactivates.
Touch a sensor field to deactivate the
acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
WARNING!
Be careful when you remove the
core temperature sensor. It is hot.
There is a risk of burns.
When you put the core tempera-
ture sensor into the socket, you
cancel the settings for the clock
functions.
14 www.electrolux.com