Electrolux EBGL70 - Manual (Page 11)

When the appliance is at the set tempera-
ture, an acoustic signal sounds three
times. The heat-up indicator goes off the
display.
6.3 Checking the temperature
You can see the temperature in the appli-
ance when the function or programme
operates.
1.
Touch .
The Temperature / Time display
shows the temperature in the appli-
ance.
2. Touch to go back to the set tem-
perature. If not, the display shows it
automatically after five seconds.
6.4 Fast Heat Up function
The Fast Heat Up function decreases the
heat up time.
Activating the Fast Heat Up function:
Activate a heating function. Touch and
hold for more than three seconds.
When you activate the Fast Heat Up func-
tion, the bars on the display
flash one
by one to show that the function operates
and
appears on the display.
Useful information
• The Fast heat up is not available with
every oven function. An acoustic signal
sounds if the Fast heat up is not availa-
ble for the set function if Faulty tone is
activated in the “Settings menu”.
6.5 Steam cooking
The water drawer cover is in the control
panel.
1. Press the cover to open the water
drawer.
2. Fill the water drawer with 700 ml of
water.
The water supply is sufficient for ap-
proximately 50 minutes.
Do not put water directly into the
steam generator!
Use only water as the liquid. Do
not use filtered (demineralised) or
distilled water.
3. Activate the appliance.
4. Set the steam heating function and
temperature.
5.
If necessary, set the DURATION or
END function (refer to "Setting the
END" or "Setting the DURATION").
The first steam shows after approxi-
mately 2 minutes. An acoustic signal
sounds when the appliance is at ap-
proximately the set temperature.
The signal sounds again at the end of
the cooking time.
6.
Touch to deactivate the acoustic
signal and the appliance.
When the steam generator is
empty, an acoustic signal sounds.
When the appliance cools down, soak up
all remaining water from the steam gener-
ator with the sponge. If necessary, clean
the steam generator with some vinegar.
Let the appliance dry fully with the door
open.
6.6 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions (Duration, End, Time delay).
– When the appliance is off, you can
use the heat to keep food warm. The
Clock / Residual heat display shows
the remaining temperature, and the
bars show the temperature as it de-
creases.
• Cooking with the lamp off - Touch
to deactivate the lamp during cook-
ing.
• Deactivating the display - If necessa-
ry, you can fully deactivate the appli-
ance. Touch
and at the same
time until the display goes out. This
step also activates the appliance.
ENGLISH 11