Electrolux EBGL70 - Manual (Page 13)

5. When set time ends, an acoustic sig-
nal sounds for two minutes. "00:00"
and
flash in the display.
6. Touch a sensor field to stop the
acoustic signal.
7.5 Setting the Time delay
function
DURATION and END can be used
at the same time, if the appliance is to be
switched on and off automatically later. In
case first set the DURATION
and then
END function (refer to "Setting the DU-
RATION" and "Setting the END" ).
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
There are 9 automatic pro-
grammes and recipes. You can
find the recipes for the automatic
programmes in the "Recipe
book".
8.1 Automatic programmes
Setting an automatic programme:
1. Activate the appliance.
2.
Touch . The display shows symbol
and number of the automatic pro-
gramme.
3.
Touch or to choose the auto-
matic recipes.
4.
Touch or wait five seconds until
the appliance automatically starts to
work.
5. When set time ends, an acoustic sig-
nal operates for two minutes. Symbol
flashes.
The appliance deactivates.
6. Touch any sensor field to stop an
acoustic signal.
8.2 Automatic programmes with
weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1. Activate the appliance.
2. Touch .
3.
Touch or to set the weight
programme (refer to "Recipe book" ).
The display shows: cooking time, du-
ration symbol
, a default weight, a
unit of measurement (g).
4.
Touch or the settings save auto-
matically after five seconds.
5. The appliance starts. The display
shows a symbol of the weight. During
this time you can change the default
weight value with
or . Touch
.
6. When set time ends, an acoustic sig-
nal operates for two minutes.
flashes.
The appliance deactivates.
7. Touch any sensor field to stop an
acoustic signal.
ENGLISH 13