Casio YC-430 - Manual (Page 13)

13
Starting Up PJ Camera Software
PJ Camera Software has two startup modes: a Multi PJ startup mode and a Business
Document startup mode. The startup mode you select determines the PJ Camera Software
functions that are available to you.
Selecting the Startup Mode
You can select the startup mode on the Startup Mode dialog box that appears when you
start up PJ Camera Software.
Clicking the [OK] button starts up PJ Camera Software in the startup mode that is
currently selected on the dialog box.
z To change the startup mode after PJ Camera Software is already running, display the
operation bar. Next, click [Tools] and then [Operating Environment]. For more information,
see “[Common] Tab” on page 112.
z If you select the “Don’t show this dialog box again” check box and then click [OK], the
Startup Mode dialog box will not appear any more when you start up PJ Camera
Software. If you change your mind and want to the Startup Mode dialog box to be
displayed again, perform the operation under “[Common] Tab” on page 112.
PJ Camera Software Startup Modes
Multi PJ Startup Mode
Starting up in the Multi PJ startup mode allows access to all
five of the PJ Camera Software modes (Document Camera
Mode, Scanner Mode, Camera Image Mode, PC Image Mode,
Presentation Mode), and all of their functions.
Business Document Startup
Mode
Starting up in the Business Document startup mode gives
you access to the Document Camera Mode and the
Presentation Mode only, which helps to make PJ Camera
Software operation more streamlined and simpler. This easy-
to-use, easy-to-understand mode is also the perfect choice for
those who are using the PJ Camera Software for the first
time.
Select the button next to
the startup mode you
want to use by clicking it.