Casio YC-430 - Manual (Page 129)

129
Menus and Commands
[Tools] Menu
Command Description
Operating
Environment This command displays a dialog box for configuring PJ Camera
Software operating environment settings.
Operation Bar
Properties This command displays a dialog box for configuring operation bar
properties.
[Image] Menu
Command Description
Specify Contour
This command can be used during projection in the Document
Camera Mode, PC Image Mode, Camera Image Mode, and Scanner
Mode. Executing this command displays a contour specification
dialog box for manual specification of a contour within the recorded
image of the image that is being projected.
Correct
Brightness
This command can be used during projection in the Document
Camera Mode, PC Image Mode, Camera Image Mode, and Scanner
Mode.
Executing this command displays a dialog box for adjusting the
brightness of the recorded image of the image that is being
projected.
Enhance White/
Normal Color
This menu appears during projection in the Document Camera
Mode, PC Image Mode, and Camera Image Mode. Use this menu
to turn white enhancement on or off.
Trapezoid
Correction On
This command can be used during projection in the Document
Camera Mode, PC Image Mode, Camera Image Mode, and Scanner
Mode.
When there is no check mark next to [Trapezoid Correction On],
images are projected without trapezoid correction. When there is a
check mark next to [Trapezoid Correction On], images are projected
with trapezoid correction.
Rotate Right
These commands can be used in the Document Camera Mode, PC
Image Mode, Camera Image Mode, and Scanner Mode.
While an image is being projected:
Executing one of these commands rotates the projected image.
While a thumbnail is selected in the PC Image Mode preview list
area or playlist area:
Executing one of these commands rotates the image in the file of
the selected thumbnail.
Rotate Left