Casio YC-430 - Manual (Page 125)

125
Menus and Commands
This section describes all of the menus that appear on the PJ Camera Software menu bar,
and their commands.
[File] Menu
Command Description
Projection Area
Capture
Triggers a Projection Area Capture operation for the projected image.
This command can be used during projection in the PC Image
Mode, Camera Image Mode, and Presentation Mode.
Board Area Capture
Triggers a Board Area Capture operation for the projected image.
This command can be used during projection in the PC Image
Mode, Camera Image Mode, and Presentation Mode.
Document
Camera
Enters the Document Camera Mode.
PC Image Enters the PC Image Mode.
Camera Image Enters the Camera Image Mode.
Scanner Enters the Scanner Mode.
Presentation Enters the Presentation Mode.
Save
Saves the projected image in its existing image file. Executing this
command for a file that has not been saved yet displays a dialog
box for assigning a new file name.
This command can be used during projection in the Document
Camera Mode, PC Image Mode, and Scanner Mode.
Save As
Displays a dialog box for saving the projected image under a
different name. This command can be used during projection in the
Document Camera Mode, PC Image Mode, Camera Image Mode,
and Scanner Mode. This command can also be used to save the
image file whose thumbnail is currently selected in the PC Image
Mode or Camera Image Mode.
Copy Image Files
This command is available in the Camera Image Mode only. It batch
copies the image files whose thumbnails are selected in the preview
list area of the Camera Image Mode to the computer.
Properties
This command displays a properties dialog box for the image file
that is being projected or the image file whose thumbnail is selected
in the preview list area.
This command can be used in the Document Camera Mode, PC
Image Mode, Camera Image Mode, and Scanner Mode.
Exit Quits PJ Camera Software.