Casio QV-3EX - Manual (Page 80)

OTHER RECORDING FUNCTIONS
E-81
Functions 2
Movie
Mode
Color
BASIC
Grid
Time
Stamp
BASIC
Select the movie mode you want to use.
Normal / Past
Use this setting to select the color mode you want.
Color / B/W / Sepia
This item turns an on-screen grid
on or off. The grid can be used to
help align image components verti-
cally and horizontally.
Off / On
Use this item to turn time stamping on and off, and to
control the format of the stamp.
Off / YMD (Year-Month-Day) / D H:M (Day-Hour-Min-
utes) / YMD H:M (Year-Month-Day-Hour-Minutes)
Note that the time stamp cannot be deleted from an
image.
Use this setting to select the white balance setting
that makes the colors of the subject appear most
natural.
(Auto / Daylight / Shade / Tungsten /Fluorescent/
Manual)
Daylight : Outdoors
Shade : Blue tinted sunlight
Tungsten : Red tinted incandescent light
Fluorescent : Green tinted fluorescent light
Manual
: Sets up the camera for recording of a
white sheet of paper under currently
available light (page E-75).
Select the setting for the flash intensity you want to
use.
Strong / Normal / Weak
Select the sync speed you want to use.
Fast / Normal / Slow
Select the sensitivity level.
High / Normal
• This setting is disabled and standard settings are
used in the case of flash and manual recording.
• Higher sensitivity can increase the chance of noise
in the image.
• Higher sensitivity can make it difficult to obtain
proper focus using Auto Focus. It does not change
the minimum brightness required for Auto Focus.
• Use of the flash automatically employs the "Nor-
mal" sensitivity setting.
White
Balance
Flash
Intensity
Sync
Speed
Sensitivity