Casio QV-3EX - Manual (Page 55)

RECORDING
E-56
Using the Flash
You can use the built-in flash unit to provide illumination dur-
ing recording.
1.
Press .
• Each press of cycles through the flash mode
in the following sequence: Auto (None) Off ( )
On ( ) Red-eye Reduction ( ).
MF/
INFO
/
Flash lamp button
• The monitor screen goes blank and the Flash lamp flashes
amber while the flash unit is charging.
Camera Shake Indicator
The (camera shake) indicator appears on the monitor
screen when a slow shutter speed is being used.
Indicator
None
Flash Mode
Auto Flash
Flash Off
Flash On
Red-eye
Reduction
Description
Flash is automatically enabled and
disabled in accordance with expo-
sure conditions.
Flash is never fired, regardless of
exposure conditions.
Flash is always fired, regardless of
exposure conditions.
Fires a pre-flash followed by re-
cording with flash, which reduces
the chance of red-eye.