Casio QV-3EX - Manual (Page 77)

OTHER RECORDING FUNCTIONS
E-78
6.
Select the item whose setting you want to
change.
7.
Select “On” or “Off”.
• Repeat steps 6 and 7 for other items if you want.
8.
Select “Exit”.
Initializing Power On Defaults and Power
Save
Use the following procedure to initialize power on defaults
and the power save settings.
IMPORTANT!
• Note that performing the following procedure to initial-
ize power on defaults also initializes power save trig-
ger time settings (page E-47).
1.
Perform steps 1 through 3 under “Turning
power on defaults on and off”.
2.
Select “Power Save”, “Mode 1” or “Mode 2”.
3.
Select “Power Save”, “Mode 1” or “Mode 2”.
4.
Select “Restore”.
• The following table shows the power on defaults sta-
tus of each item following the above procedure.
5.
Select “Exit”.