Epson Stylus TX100 - Manual (Page 77)

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 77
Confidential
4.5.7 Ink System
† Parts/Components need to be removed in advance:
Scanner Stand/Cover Wire ( p 60 ), Scanner Unit ( p 62 ), Middle Housing ( p 63 )
Panel Unit ( p 64 ), CR Motor/ Driven Pulley ( p 75 )
† Removal procedure
„ Cap Assy
1. Remove the Cleaner Lever Spring.
2. Remove the Cleaner Case Spring.
Figure 4-49. Removing the Cap Assy (1)
3. Insert a flathead precision screwdriver between the Lower Housing and the
Pump Assy and push it in the direction of the arrow to release the hook.
Figure 4-50. Removing the Cap Assy (2)
4. Move the Pump Assy to the ASF slightly, and remove the protrusion B of the Cap
Assy.
5. Remove the two protrusion Cs of the Pump Assy from the Lower Housing.
Figure 4-51. Removing the Cap Assy (3)
C A U T I O N
„ Be careful not to contaminate the surroundings with ink.
„ Do not bend the Spring Cleaner Lever and the Cleaner Case
Spring.
„ Do not touch the Sealing Rubber, the Blade Wiper or the Felt
Wiper with bare hands or damage them.
Cleaner Case Spring
Cleaner Lever Spring
Cap Assy
Hole
Lever Cleaner
Protrusion A
Pump Assy
Hook
Protrusion B
Cap Assy
Pump Assy
Protrusion C