Casio FX-9750GII - Manual (Page 372)

20051101
u To recall a setup and use it for sampling
Be sure to perform the following steps before starting sampling with the EA-200.
1. Connect the calculator to the EA-200.
2. Turn on EA-200 power.
3. In accordance with the setup you plan to use, connect the proper sensor to the
appropriate EA-200 channel.
4. Prepare the item whose data is to be sampled.
5. On the E-CON2 main menu (page 1-1), press
2(MEM) to display the setup memory list.
6. Use the f and c cursor keys to highlight the name of the setup you want.
7. Press
1(STRT).
8. In response to the confirmation message that appears, press
1.
• Pressing
w sets up the EA-200 and then starts sampling.
• To clear the confirmation message without sampling, press
6.
Note
• See “Operations during a sampling operation” on page 8-2 for information about
operations you can perform while a sampling operation is in progress.
u To change the name of setup data
1. On the E-CON2 main menu (page 1-1), press
2(MEM) to display the setup memory list.
2. Use the f and c cursor keys to highlight the name of the setup you want.
3. Press
3(REN).
• This displays the screen for inputting the setup name.
6-3
Using Setup Memory
20070101
4. Input up to 18 characters for the setup name, and then press
w.
• This changes the setup name and returns to the setup memory list.