Casio EX-P600 - Manual (Page 194)

PRINTING IMAGES
194
9.
On the camera’s monitor screen, use [ ] and
[ ] to select “Print”, and then press [SET].
• This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
• To print again, repeat the above from step 8.
10.
The camera will turn off automatically when
printing is complete. After this happens,
disconnect the USB cable from the camera.
To print a group of images
1. Use the DPOF procedure on page 189 to
specify the images in file memory that you
want to print.
2.
Perform steps 1 through 7 of the procedure
under “To print a single image” on page 192.
3.
On the print menu, use [ ] and [ ] to select
“DPOF”, and then press [SET].