Casio EX-P600 - Manual (Page 126)

126
OTHER RECORDING FUNCTIONS
Resetting the Camera
Use the following procedure to reset all of the camera’s
settings to their initial defaults as shown under “Menu
Reference” on page 230.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the “Set Up” tab, select “Reset”, and
then press [
].
3.
Use [ ] and [ ] to select “Reset”, and then
press [SET].
• To cancel the procedure without resetting, select
“Cancel” and press [SET].
IMPORTANT!
• If you change the BESTSHOT mode sample scene
selection or if you turn off the camera while it is in the
BESTSHOT mode, the camera’s setup (except for
“Zoom Position”) will be configured according to the
BESTSHOT sample scene settings when you turn it
back on again. This is true, regardless of mode
memory on/off settings.
• If you turn the camera off while in the Movie mode,
the flash will be turned off when you turn the camera
back on again, regardless of mode memory on/off
setting.