Emerson Liebert Remote Monitoring Panel - Manual (Page 6)

Introduction
2
1.0 I
NTRODUCTION
The Liebert NX Remote Monitoring Panel (RMP) is designed as a remote user interface to monitor
Liebert NX Uninterruptible Power Systems. The RMP monochrome liquid crystal display measures
122 x 92mm (4.8 x 3.6 inches). It reports the same data and status and alarm messages that are
shown by the LCD on the UPS’s door. The RMP does not offer control of the UPS.
The RMP should be installed in a room where it is readily and easily observed by personnel, such as
facility and maintenance staff. This type location enhances the unit’s capacity to provide notice if a
status change or alarm requires an electrician or a UPS technician's intervention.
The RMP can monitor only one Liebert NX UPS. If there are multiple Liebert NX UPSs, an RMP will
need to be installed for each unit. For parallel systems, the system load information may be viewed
via the system screen from any RMP that is connected to a UPS in that system (see 3.6 - Detailed
Description of Menu Items.)
Figure 1 Remote Monitoring Panel components and functions
9 8 10 12 11
17
16
4
6
7
5
1
3
2
F1 F2 F3 HELP F4
14 15
13
11-21/32"
(296mm)
11-13/32"
(290mm)
15-53/64" (402mm)
4-41/64"
(118mm)
4-15/16"
(100mm)
15-3/4" (400mm)