Epson ELP-3300 User Manual

Page 41

2 • Using the Projector

If you need to raise or lower the image on the screen, extend or retract the two
feet at the bottom of the projector as follows:

1. Stand behind the projector and support the front of it while you press the

purple release buttons located above the feet. This unlocks the feet so they
can move up and down freely. Do not let the projector drop.

◆

Caution:

Do not hold the projector by its lens. This can damage the lens.

2. While pressing the release buttons, raise or lower the projector until the

screen image is correctly positioned.

3. Release the buttons to lock the feet in their new position.

4. To fine-tune the height of the projector, turn the feet clockwise to raise the

height or counterclockwise to lower it.